/sys/replication/dr
Enterprise Only – These endpoints require Vault Enterprise.
Check DR status
This endpoint prints information about the status of replication (mode, sync progress, etc).
This is an unauthenticated endpoint.
Method | Path |
---|---|
GET | /sys/replication/dr/status |
Sample request
Sample response from primary
The printed status of the replication environment. As an example, for a primary, it will look something like:
Sample response from secondary
The printed status of the replication environment. As an example, for a secondary, it will look something like:
Enable DR primary replication
This endpoint enables DR replication in primary mode. This is used when DR replication is currently disabled on the cluster (if the cluster is already a secondary, it must be promoted).
Method | Path |
---|---|
POST | /sys/replication/dr/primary/enable |
Parameters
primary_cluster_addr
(string: "")
– Specifies the cluster address that the primary gives to secondary nodes. Useful if the primary's cluster address is not directly accessible and must be accessed via an alternate path/address, such as through a TCP-based load balancer.
Sample payload
Sample request
Demote DR primary
This endpoint demotes a DR primary cluster to a secondary. This DR secondary cluster will not attempt to connect to a primary (see the update-primary call), but will maintain knowledge of its cluster ID and can be reconnected to the same DR replication set without wiping local storage.
Method | Path |
---|---|
POST | /sys/replication/dr/primary/demote |
Sample request
Disable DR primary
This endpoint disables DR replication entirely on the cluster. Any secondaries will no longer be able to connect. Caution: re-enabling this node as a primary or secondary will change its cluster ID; in the secondary case this means a wipe of the underlying storage when connected to a primary, and in the primary case, secondaries connecting back to the cluster (even if they have connected before) will require a wipe of the underlying storage.
Method | Path |
---|---|
POST | /sys/replication/dr/primary/disable |
Sample request
Generate DR secondary token
This endpoint generates a DR secondary activation token for the cluster with the given opaque identifier, which must be unique. This identifier can later be used to revoke a DR secondary's access.
This endpoint requires 'sudo' capability.
Method | Path |
---|---|
POST | /sys/replication/dr/primary/secondary-token |
Parameters
id
(string: <required>)
– Specifies an opaque identifier, e.g. 'us-east'ttl
(string: "30m")
– Specifies the TTL for the secondary activation token.secondary_public_key
(string: "")
– Specifies the secondary's generated public key, if using encryption rather than response wrapping to protect the secondary credentials. (Vault 1.3+)
Sample payload
Sample request
Sample response
Revoke DR secondary token
This endpoint revokes a DR secondary's ability to connect to the DR primary cluster; the DR secondary will immediately be disconnected and will not be allowed to connect again unless given a new activation token. This command can be run from any node on the DR primary cluster.
Method | Path |
---|---|
POST | /sys/replication/dr/primary/revoke-secondary |
Parameters
id
(string: <required>)
– Specifies an opaque identifier, e.g. 'us-east'
Sample payload
Sample request
Fetch DR secondary public key
(Vault 1.3+)
This endpoint allows fetching a public key that is used to encrypt the returned credential information (instead of using a response wrapped token). This avoids needing to make an API call to the primary during activation.
Method | Path |
---|---|
POST | /sys/replication/dr/secondary/generate-public-key |
Sample request
Enable DR secondary
This endpoint enables replication on a DR secondary using a DR secondary activation token.
This will immediately clear all data in the secondary cluster!
Method | Path |
---|---|
POST | /sys/replication/dr/secondary/enable |
Parameters
token
(string: <required>)
– Specifies the secondary activation token fetched from the primary.primary_api_addr
(string: "")
– Set this to the API address (normal Vault address) to override the value embedded in the token. This can be useful if the primary's redirect address is not accessible directly from this cluster (e.g. through a load balancer).ca_file
(string: "")
– Specifies the path to a CA root file (PEM format) that the secondary can use when unwrapping the token from the primary. If this and ca_path are not given, defaults to system CA roots.ca_path
(string: "")
– Specifies the path to a CA root directory containing PEM-format files that the secondary can use when unwrapping the token from the primary. If this and ca_file are not given, defaults to system CA roots.
Sample payload
Sample request
Promote DR secondary
This endpoint promotes the DR secondary cluster to DR primary. For data safety and security reasons, new secondary tokens will need to be issued to other secondaries, and there should never be more than one primary at a time.
If the DR secondary's primary cluster is also in a performance replication set, the DR secondary will be promoted into that replication set. Care should be taken when promoting to ensure multiple performance primary clusters are not active at the same time.
If the DR secondary's primary cluster is a performance secondary, the promoted cluster will attempt to connect to the performance primary cluster using the same secondary token.
This endpoint requires a DR Operation Token to be provided as means of authorization. See the DR Operation Token API docs for more information.
Only one performance primary should be active at a given time. Multiple primaries may result in data loss!
It is not safe to replicate from a newer version of Vault to an older version. When upgrading replicated clusters, ensure that upstream clusters are always on older versions of Vault than downstream clusters. See Upgrading Vault for an example.
Method | Path |
---|---|
POST | /sys/replication/dr/secondary/promote |
Parameters
dr_operation_token
(string: <required>)
- DR operation token used to authorize this request.primary_cluster_addr
(string: "")
– Specifies the cluster address that the primary gives to secondary nodes. Useful if the primary's cluster address is not directly accessible and must be accessed via an alternate path/address (e.g. through a load balancer).force
(bool: false)
- If true the cluster will be promoted even if it fails certain safety checks. Caution: Forcing promotion could result in data loss if data isn't fully replicated.
Sample payload
Sample request
Sample response
Disable DR secondary
This endpoint disables DR replication entirely on the cluster. The cluster will no longer be able to connect to the DR primary.
Re-enabling this node as a DR primary or secondary will change its cluster ID; in the secondary case this means a wipe of the underlying storage when connected to a primary, and in the primary case, secondaries connecting back to the cluster (even if they have connected before) will require a wipe of the underlying storage.
Method | Path |
---|---|
POST | /sys/replication/dr/secondary/disable |
Sample request
Update DR secondary's primary
This endpoint changes a DR secondary cluster's assigned primary cluster using a secondary activation token. This does not wipe all data in the cluster.
This endpoint requires a DR Operation Token to be provided as means of authorization. See the DR Operation Token API docs for more information.
Method | Path |
---|---|
POST | /sys/replication/dr/secondary/update-primary |
Parameters
dr_operation_token
(string: <required>)
- DR operation token used to authorize this request.token
(string: <required>)
– Specifies the secondary activation token fetched from the primary. If you set this to a blank string, the cluster will stay a secondary but clear its knowledge of any past primary (and thus not attempt to connect to the previous primary). This can be useful if the primary is down to stop the secondary from trying to reconnect to it.primary_api_addr
(string: )
– Specifies the API address (normal Vault address) to override the value embedded in the token. This can be useful if the primary's redirect address is not accessible directly from this cluster.ca_file
(string: "")
– Specifies the path to a CA root file (PEM format) that the secondary can use when unwrapping the token from the primary. If this and ca_path are not given, defaults to system CA roots.ca_path
string: ()
– Specifies the path to a CA root directory containing PEM-format files that the secondary can use when unwrapping the token from the primary. If this and ca_file are not given, defaults to system CA roots.
Sample payload
Sample request
Generate disaster recovery operation token
The /sys/replication/dr/secondary/generate-operation-token
endpoint is used to create a new Disaster
Recovery operation token for a DR secondary. These tokens are used to authorize
certain DR Operations. They should be treated like traditional root tokens by
being generated when needed and deleted soon after.
Read generation progress
This endpoint reads the configuration and process of the current generation attempt.
Method | Path |
---|---|
GET | /sys/replication/dr/secondary/generate-operation-token/attempt |
Sample request
Sample response
If a generation is started, progress
is how many unseal keys have been
provided for this generation attempt, where required
must be reached to
complete. The nonce
for the current attempt and whether the attempt is
complete is also displayed. If a PGP key is being used to encrypt the final
token, its fingerprint will be returned. Note that if an OTP is being used to
encode the final token, it will never be returned.
Start token generation
This endpoint initializes a new generation attempt. Only a single generation attempt can take place at a time.
Method | Path |
---|---|
POST | /sys/replication/dr/secondary/generate-operation-token/attempt |
Parameters
pgp_key
(string: <optional>)
– Specifies a base64-encoded PGP public key. The raw bytes of the token will be encrypted with this value before being returned to the final unseal key provider.
Sample request
Sample response
Cancel generation
This endpoint cancels any in-progress generation attempt. This clears any progress made. This must be called to change the OTP or PGP key being used.
Method | Path |
---|---|
DELETE | /sys/replication/dr/secondary/generate-operation-token/attempt |
Sample request
Provide key share to generate token
This endpoint is used to enter a single root key share to progress the generation attempt. If the threshold number of root key shares is reached, Vault will complete the generation and issue the new token. Otherwise, this API must be called multiple times until that threshold is met. The attempt nonce must be provided with each call.
Method | Path |
---|---|
POST | /sys/replication/dr/secondary/generate-operation-token/update |
Parameters
key
(string: <required>)
– Specifies a single root key share.nonce
(string: <required>)
– Specifies the nonce of the attempt.
Sample payload
Sample request
Sample response
This returns a JSON-encoded object indicating the attempt nonce, and completion status, and the encoded token, if the attempt is complete.
Delete DR operation token
This endpoint revokes the DR Operation Token. This token does not have a TTL and therefore should be deleted when it is no longer needed.
Method | Path |
---|---|
POST | /sys/replication/dr/secondary/operation-token/delete |
Parameters
dr_operation_token
(string: <required>)
- DR operation token used to authorize this request.
Sample payload
Sample request
Reindex replication
This endpoint reindexes the local data storage. This can cause a very long delay depending on the number and size of objects in the data store.
This endpoint requires a disaster recovery operation token.
Method | Path |
---|---|
POST | /sys/replication/dr/secondary/reindex |
Parameters
diff
(bool: false)
– Enables a slower re-indexing which will perform a key level check to diagnose issues. Defaults false.force
(bool: false)
– Forces a complete re-indexing which only scans data available in the storage. Defaults false.skip_flush
(bool: false)
– Skips the tree flushing stage of the reindex process. This setting can be used to reduce the amount of time the tree is locked during a reindex process. If this node is killed before the full tree has been asynchronously flushed the reindex may not have applied fully and a new reindex may need to be done. Defaults false.dr_operation_token
(string: <required>)
- DR operation token used to authorize this request.
Sample payload
Sample request
Sample response